Orange5 Super Pro Software Download: A Guide for Beginners
If you are looking for a professional programming device for memory and microcontrollers, you may have heard of Orange5 Super Pro. This device is a powerful and versatile tool that can help you with various tasks such as reading, writing, verifying, editing, and erasing EEPROM, FLASH, and MCU chips. But how can you download and install the Orange5 Super Pro software on your PC? And how can you use it effectively? In this article, we will answer these questions and provide you with a comprehensive guide on Orange5 Super Pro software download and installation.
orange5 super pro software download
What is Orange5 Super Pro?
Orange5 Super Pro is an upgraded version of the original Orange5 programmer, which was released in 2016. The new version adds more features and functions, such as airbag and dash modules in the USB dongle, more MCUs supported, enhanced power supply, and improved pin drivers. Orange5 Super Pro is compatible with Windows XP / 7 / 8 / 10 operating systems and supports various interfaces such as I2C, SPI, MicroWire, JTAG, UART, BDM, ISO7816, K-LINE, and CAN.
Features and benefits of Orange5 Super Pro
Some of the unique features and benefits of Orange5 Super Pro are:
USB power supply (USB2.0/3.0) for easy connection and portability
Universal easy to plug panel ZIF16 for EEPROM chips
Control of contacts in the sockets for reliable programming
Two expansions compatible with Orange4 and Omega MTRK adapters
Protection against overcurrent and overload voltage
Three adjustable voltage and current control: power supply voltage (2.0...5.0V), programming voltage (2.0...21.0V), and additional static 10V for microcontrollers
High-speed bidirectional pin drivers with adjustable voltage (2.0...5.0V)
Wave cycle generator with frequency (up to 24 MHz) and output voltage (2.0...5.0V) adjustment
Capability of functional emulation of class CDC USB devices
Built-in 32-bit virtual machine for fast execution of complex algorithms
Supported devices and protocols by Orange5 Super Pro
Orange5 Super Pro supports a wide range of devices and protocols, such as:
EEPROM: 24Cxx, 25Cxx, 93Cxx, M95xxx, NVM3060, M35080, etc.
MICROWIRE: 68HC05B, 68HC05X32, 68HC05X16, etc.
MICROCHIP: PIC12Fxxx, PIC16Fxxx series.
SPI FLASH: M25P10-A, W25X10A, N25Q032, etc.
I2C BUS: PCF8582C-2T/24C02G, PCF8594C-2T/24C04G, etc.
JTAG interface: ARM7TDMI-S cores.
BDM interface: MC68HC11EA9/MC68HC11E20/MC68HC11E9/MC68HC11EA9/MC68HC11K4/MC68HC11KA4/MC68HC11KW1/MC68HC11L6/MC68HC11P2/MC68HC11PA8/MC68HC11PH 8/MC68HC11KA2/MC68HC11KS2/MC68HC11KA2/MC68HC11KS8/MC68HC11L6/MC68HC11P2/MC68HC11PA8/MC68HC11PH8, etc.
CAN interface: SJA1000/82C250.
K-line interface: ISO 9141-2, ISO 14230-4.
UART interface: LIN, IrDA, etc.
How to download and install Orange5 Super Pro software?
Before you can use Orange5 Super Pro device, you need to download and install the software on your PC. The software is available for free from various online sources, but you need to be careful about the quality and security of the files. Some of the software may contain viruses, malware, or outdated versions that can damage your device or PC. Therefore, we recommend you to use the official or verified links for Orange5 Super Pro software download.
Free download links for Orange5 Super Pro V1.35 and V1.36 software
The latest versions of Orange5 Super Pro software are V1.35 and V1.36, which were released in 2020 and 2021 respectively. These versions have improved functions and added support for more chips and modules. You can download them for free from the following links:
Note: These links are from reliable sources and have been tested by many users. However, we are not responsible for any damage or loss caused by using these links. Please use them at your own risk and discretion.
Step-by-step installation guide for Orange5 Super Pro software
After you have downloaded the Orange5 Super Pro software, you need to install it on your PC. The installation process is simple and straightforward, but you need to follow some steps carefully to avoid any errors or problems. Here is a step-by-step installation guide for Orange5 Super Pro software:
Extract the downloaded file to a folder on your PC.
Open the folder and run the setup.exe file as administrator.
Follow the instructions on the screen and choose the language, destination folder, and components to install.
Wait for the installation to complete and click Finish.
Copy the USB Dongle folder from the extracted file to the installation folder (usually C:\Program Files\Orange5).
Open the USB Dongle folder and run the DriverInstall.exe file as administrator.
Click Install Driver and wait for the driver installation to finish.
Restart your PC to apply the changes.
Congratulations! You have successfully installed Orange5 Super Pro software on your PC. Now you can use it with your device.
orange5 super pro v1.35 software free download
orange5 super pro v1.36 software free download
orange5 super pro driver installation guide
orange5 super pro programming device for memory and microcontrollers
orange5 super pro usb dongle with airbag and dash modules
orange5 super pro vs orange5 plus clone comparison
orange5 super pro latest standard software download
orange5 super pro supported interface and OS
orange5 super pro wave cycle generator with frequency adjustment
orange5 super pro high-speed bidirectional pin drivers
orange5 super pro functional emulation of class CDC USB devices
orange5 super pro built-in 32-bit virtual machine
orange5 super pro universal easy to plug panel ZIF16 for EEPROM
orange5 super pro protection against overcurrent and overload voltage
orange5 super pro two expansions compatible with Orange4 and Omega MTRK
orange5 super pro control of contacts in the sockets
orange5 super pro programming voltage and power supply voltage control
orange5 super pro programmer enclosed in a functional box
orange5 super pro unique feature of the current series programmers
orange5 super pro professional programming device review
how to use orange5 super pro to read and write chips
how to update orange5 super pro software and firmware
how to solve orange5 super pro usb device not found error
where to buy original or clone orange5 super pro online
what is the difference between orange5 and orange5 super pro
how to connect orange5 super pro with PC via USB cable
how to install orange setup as administrator on Windows XP/7/8/10
how to choose driver location depends on your system x64 or x32
how to check the status of the orange5 super pro device in device manager
how to run the orange software as administrator on your computer
what are the advantages and disadvantages of using orange5 super pro
what are the supported memory and microcontroller types by orange5 super pro
what are the best practices and tips for using orange5 super pro safely and effectively
what are the common problems and solutions for using orange5 super pro
how to contact the customer service or technical support of orange5 super pro
How to use Orange5 Super Pro software?
Once you have installed Orange5 Super Pro software on your PC, you can start using it with your device. The software is easy to use and has a user-friendly interface that allows you to perform various operations on different chips and modules. Here is how to use Orange5 Super Pro software:
Connect Orange5 Super Pro device with PC and USB dongle
The first step is to connect your Orange5 Super Pro device with your PC and USB dongle. To do this, you need to:
Plug the USB dongle into a free USB port on your PC.
Connect the power supply cable of your device to a power outlet.
Connect the USB cable of your device to another free USB port on your PC.
Turn on your device by pressing the power button on the front panel.
You should see a green LED light on your device indicating that it is connected and ready to use.
Run Orange5 Super Pro software and select chip to read or write
The next step is to run Orange5 Super Pro software and select the chip or module that you want to read or write. To do this, you need to:
Open Orange5 Super Pro software on your PC by double-clicking the icon on your desktop or start menu.
Select the chip or module that you want to work with from the list on the left side of the screen.
If necessary, adjust the settings such as voltage, frequency, and mode according to the chip specifications and your needs.
Insert the chip or module into the appropriate socket or adapter on your device.
Click the Read button on the top menu to read the data from the chip or module and display it on the screen.
If you want to write new data to the chip or module, you can edit the data on the screen or load a file from your PC by clicking the Open button on the top menu.
Click the Write button on the top menu to write the data to the chip or module and verify it.
You can also perform other operations such as erase, copy, compare, and check by using the buttons on the top menu. You can also save the data to a file on your PC by clicking the Save button on the top menu.
Conclusion
Orange5 Super Pro is a powerful and versatile programming device for memory and microcontrollers. It has many features and benefits that make it a useful tool for various applications. To use Orange5 Super Pro, you need to download and install the software on your PC and connect your device with your PC and USB dongle. Then, you can select the chip or module that you want to read or write and perform various operations on it. Orange5 Super Pro software is easy to use and has a user-friendly interface that allows you to work with different chips and modules efficiently.
FAQs
Here are some of the frequently asked questions about Orange5 Super Pro software download and installation:
Q: Where can I buy Orange5 Super Pro device?
A: You can buy Orange5 Super Pro device from various online stores or official distributors. You can also contact us for more information and assistance.
Q: What are the system requirements for Orange5 Super Pro software?
A: Orange5 Super Pro software is compatible with Windows XP / 7 / 8 / 10 operating systems. You need a PC with at least 1 GB of RAM, 500 MB of free disk space, and a USB port.
Q: How can I update Orange5 Super Pro software?
A: You can update Orange5 Super Pro software by downloading the latest version from the official website or verified sources and installing it on your PC. You can also check for updates from within the software by clicking the Help button on the top menu and selecting Check for Updates.
Q: How can I get technical support for Orange5 Super Pro software?
A: You can get technical support for Orange5 Super Pro software by contacting us via email, phone, or online chat. You can also visit our website for more information and resources.
Q: What are some of the common errors or problems that may occur when using Orange5 Super Pro software?
A: Some of the common errors or problems that may occur when using Orange5 Super Pro software are:
The device is not detected by the software or PC.
The chip or module is not recognized by the software or device.
The read or write operation fails or takes too long.
The data is corrupted or incorrect.
To solve these errors or problems, you can try the following solutions:
Check the connection of your device, PC, and USB dongle.
Check the power supply of your device and PC.
Check the settings of your software and device according to the chip specifications and your needs.
Check the quality and compatibility of your chip or module.
Check the version and update of your software and device.
Contact us for further assistance if none of these solutions work.
44f88ac181
Comments